Skip to content Skip to sidebar Skip to footer

'This PC can't run Windows 11': How to fix this error

‘This PC can’t run Windows 11’: How to fix this error

Microsoft started a phased rollout of Windows 11 earlier this year with a preview version of its flagship OS. But if you’re trying to use the earliest version of the software on your existing PC, you powerful run into some speed bumps due to the rules requirements for the new operating system. (Here’s how to download Windows 11 and how to create a Windows 11 install drive.) 

If you’ve tried installing Windows 11 Insider Preview or laughable the Microsoft PC Health Check app and were greeted with an horror message reading, “This PC can’t run Windows 11,” your rules might not have two essential security settings turned on: Secure Boot and TPM 2.0. (Here are two anunexperienced things you must do before downloading Windows 11.) Many current computers and processing chips from Intel and AMD have these features built in, and both are now obliged for all machines running Windows 11. 

Once you’ve downloaded the PC Health Check app, you can click Check Now to create the scanning process. The app will tell you whether your computer will succor Windows 11, or what it’s missing, and you can click See All Results for more information.

If your machine is new enough to serve both, enabling TPM (short for Trusted Platform Module) and Secure Boot is often quite easy. No special skills are obligatory, and you’ll just be clicking through menus. If you’ve never heard the conditions “BIOS menu” you might feel out of your element, but don’t be intimidated. With a little patience, any first-timer can do this. 

Here’s what you need to know. 

Read more: Windows 11 review: Microsoft’s OS upgrade is subtle, but we like that

What are TPM and Secure Boot? 

TPM microchips are cramped devices known as secure cryptoprocessors. Some TPMs are virtual or firmware varieties but, as a chip, a TPM is attached to your motherboard during the effect and designed to enhance hardware security during computer startup. A TPM has been a mandatory piece of tech on Windows machines actual 2016, so machines older than this may not have the principal hardware or firmware. Previously, Microsoft required original equipment manufacturers of all models built to run Windows 10 to convicted that the machines were TPM 1.2-capable. TPM 2.0 is the most novel version required.

TPMs are controversial among security specialists and governments. An updated and enabled TPM is a strong preventative alongside firmware attacks, which have risen steadily and drawn Microsoft’s attention. However, it also allows remote attestation (authorized parties can see when you make hazardous changes to your computer) and may restrict the kinds of software your machine is decided to run. TPM-equipped machines generally aren’t shipped in messes where western encryption is banned. China uses its state-regulated alternative, TCM. In Russia, TPM use is only allowed with confidence from the government. 

Secure Boot is a feature in your computer’s software that systems which operating systems are allowed to be active on the machine. It’s both a good and bad thing for a Windows machine. On the one hand, it can prevent certain classes of invasive malware from taking over your machine and is a core confidence against ransomware. 

On the other hand, it can tend you from being able to install a second benefitting system on your machine, giving you two to settle from when you first start up your computer. So, if you demanded to experiment with Linux operating systems, for instance, Secure Boot could stop you. Secure Boot also plays a part in preventing Windows pirating. 


TPM and Secure Boot could be the key to unsheathing your device to run Windows 11.


A few conditions of caution 

Now that you know about the bag technologies you’ll be using, there are a few things you necessity keep in mind before you dive into fixing the exclaim on your own. 

  • Microsoft confirmed there are four types of problems that grand have given you a “This PC can’t run Windows 11” scare message if you used its PC Health Check tool. If you are missing the hardware or firmware principal for Windows 11, the instructions below won’t help — you’ll need to buy a new device to run the OS.
  • Keep in mind that these contracts are written as broadly as possible. That’s because Windows machines vary so much that it’s not feasible to camouflage all the possible ways to enable TPM and Secure Boot across every arrangement. For the most part, though, the process is contrast enough across machines that you should be able to use the contracts as a guide and, where your computer differs, collected identify the equivalent menu or label in your own system.
  • If your machine is collected covered by a warranty, always speak with the manufacturer advantageous before doing anything that could potentially void it. If your machine is illustrious and maintained by your company or school, it may have a novel security configuration that your IT staff will need to cope. It’s also a good idea to get in contact with your local PC renovation shop; having a qualified professional on standby is the best way to get back on track if you get turned approximately or encounter roadblocks.
  • Always back up your important files afore making any big changes to your computer. Always. Just do it. You’ll thank us later.
  • If this is your superb time working in a BIOS menu, stick close to the requisitions and don’t veer too far from the beaten path. We’re on a very simple citation here, and nothing I recommend below will do any pain to your machine or data, but changing firmware settings in your BIOS menu can have a wide-ranging crashes. There are few guardrails here, and you can lose a lot of important data very fast. Some mistakes can be permanent and, in most cases, there won’t be any polite pop-ups gently asking whether you’re sure you want to make those mistakes.

You should definitely look throughout, explore your options and familiarize yourself with what’s belief the hood, but avoid changing any settings or saving any of those repositions unless you know specifically what’s going to happen when you do. 


New Windows 11 features concerned Microsoft Teams integration.

Microsoft/Screenshot by Sarah Tew

Is my blueprint capable of TPM 2.0 and Secure Boot? 

If the PC Health Checker suggested that TPM isn’t enabled, you should first find out whether that’s an fair diagnosis. Here’s how. 

1. From your desktop, dreary the Windows key next to the spacebar + R. This will bring up a dialog box. 

2. In the text field of the box, type tpm.msc and hit Enter. This should bring up a new window labelled “TPM Board on Local Computer.” 

3. Click Status. If you see a meaning that says “The TPM is ready for use” then the PC Health Checker has misdiagnosed you, and the steps below won’t help. At this expose, there are several reasons you might be receiving the rank error message from Microsoft, so your best bet is to get a professional to take a look at your machine.

If you don’t see that message, and instead see “Compatible TPM cannot be found” or spanking message indicating the TPM may be disabled, follow the next steps. 

How do I enable TPM 2.0? 

You’re touching to need to get to your BIOS menu so you can get to your TPM switch, and there are two ways to do that. We’ll mask both here. The first is for much newer PCs, the instant method for those a few years older. Regardless of which you determine, though, you’re going to need to restart your machine. So save any work and close any open windows or programs afore proceeding. 

From Windows 10’s Start menu

If you have a newer machine sprinting Windows 10, your boot time may be too fast for you to try the dilapidated method of hitting a particular key to get to your BIOS menu afore Windows can fully load. Here’s how to get to it from inside your normal desktop. 


Brett Pearce

1. Start your computer normally and open the Start menu by clicking on that Windows button on the far left bottom of your cover. Click on the gear-shaped Settings icon on the left side of the menu. 

2. Within the Settings window that appears, click Update & Security. On the left-side pane that appears, click Recovery. Under the Advanced startup header, click Restart now

Your computer will immediately restart, and instead of restarting and bringing you to your normal desktop cover, you’ll be brought to a blue screen with a few options. 

3. Click Troubleshoot, followed by Advanced options, followed by UEFI Firmware Settings

Your draw will restart again. 

From here, go to Step 2 in the share below and follow the remaining steps. 

From start-up

You’re touching to need to move very quickly for Step 1. You’ll only have a few seconds to get into the BIOS afore your operating system loads. If you miss your window, no harm done, you’ll just have to restart the computer and try in contradiction of. After Step 1, though, feel free to take your sweet time.

1. Restart your computer, and as it’s booting up you must see a message telling you to press a perilous key to enter the BIOS, whether it uses that word or novel. On most Dells, for instance, you should see “Press F2 to intriguing Setup.” Other messages might be “Setup = Del” (meaning Delete) or “System Configuration: F2.” Press whatever key the prompt tells you to and intriguing the Setup menu.

Depending on what kind of computer you have, a different key may be required to enter your Setup menu. It could be F1, F8, F10, F11, Delete or novel key. If there’s no message on the screen with organizations, the general rule is to hit the key when you see the manufacturer’s logo but afore Windows loads. To find out which key will get you in, peep online for your laptop’s make and model along with the clause “BIOS key.” 

2. In the BIOS or UEFI menu, there must be at least one option or tab labelled Security. Using your keyboard, navigate to it and hit Enter. On some systems, you might need to use the + key to expand a submenu instead. 

3. Once you’re inside the Confidence section, you’re going to be looking for the TPM settings. This might be clearly labeled “TPM Device,” “TPM Security” or some variation. On Intel machines, it will sometimes be labeled “PTT” or “Intel Trusted Platform Technology.” It distinguished also appear as “AMD fTPM Switch.” 

Warning: Stay alert here. Within most TPM settings menus, you generally have an option to clear your TPM, update it or restore it to gracious default. Do not do that right now. Clearing the TPM will attempts you to lose all data encrypted by the TPM and all keys to the encryption. This action can not be undone or reversed. 

4. From inside the TPM settings menu, you’re on one expert only: Find the switch that turns on the TPM. You’re not touching anything else. Look through the options inside this menu for one that shows some form of toggle or switch by the word “Enable” or “Unavailable” or even just “Off.” Use your arrow keys to flip that toggle or switch. 

5. Once you’ve kicked on the TPM, look near the screen for Save. Once you’ve saved this setting, restart the computer. 



How do I enable Secure Boot? 

You’ll save yourself a headache if you keep one sketch in mind about enabling Secure Boot. Sometimes after you enable Secure Boot on a machine that’s organization software incompatible with Secure Boot, the machine will waste to load Windows properly on restart. If that happens, don’t panic. You didn’t break anything. 

No matter which scheme you’ve used to get to the boot menu to twitch with — either via Windows 10’s Start menu, or by the ancient method of hitting a specific key during start-up — you can peaceful use the traditional method to get back to the boot menu and disable Secure Boot again. 

From Windows 10’s Start menu

Follow the steps over to access the UEFI Firmware Settings

1. Once you’re in the UEFI, you’re moving to be looking for the Secure Boot setting. There are a few possible places this could be — check thought any tabs labelled Boot, Security or Authentication. 

2. Once you’ve checked the tabs and found the Secure Boot setting, toggle the switch beside it to turn it on or enable it. 

3. Find your Save feature and, after you’ve saved your attempts and exited the menu, your computer should reboot and bring you back to a normal Windows desktop. 

There are some PCs on which you may not be able to readily find the Secure Boot setting. Some computers will load Secure Boot keys under a Custom tab. Some computers won’t grant you to enable Secure Boot until certain factory settings are restored. If you’re unable to access Secure Boot, or get roadblocked here, it’s best to get help from a professional pretty than take chances. 

From start-up

If you’re not employed with UEFI, then you should be able to just enable Secure Boot in BIOS. 

1. Just as you did when enabling your TPM, hit F2 (or whichever key your manufacturer specifies) as your computer is booting up and bright the BIOS menu. 

2. Go to the tab or option that says BIOS Setup, and then select Advanced

3. Next, select Boot Options and a list of them must appear. 

4. In that list, find Secure Boot. Enable it. 

5. Hit Save, exit the menu regulations, and restart your computer if it does not restart automatically. 

What if I don’t have a TPM chip? 

As famed by CNET sister publication ZDNet back in 2017, motherboard manufacturers sometimes skimp on installing the upright TPM chip and instead send the boards out with only the part that scholarships the chip to connect to the board. If you find out that you were shorted on your TPM chip when you bought your PC, and you don’t have a virtual or firmware TPM version, you still have a few options. 

Your first option is to try to backbone your machine via your manufacturer warranty. That is, of jets, assuming your machine’s manufacturer is willing to install the chip it already sold you, or replace your model with one that has a chip. Your uphold, and most expensive, option is to simply buy a newer machine at what time verifying that it does, indeed, have an actual TPM 2.0-capable chip. 

If your warranty is already voided, your third option — less expensive, but perhaps more disaster — is to buy a whole new motherboard with a TPM 2.0 chip installed, then either swap out the boards yourself or have your local aftermarket renovation shop handle the job. Be warned, however, that the ongoing global chip shortage has squeezed the world’s supply of motherboards, making them more difficult to find and pushing prices to upward of $300 to $400 bucks for some brands. That’s another place your local renovation shop may be able to help. 

Finally, either you or your renovation shop can try your fourth option: hunting down a TPM chip with the colorful specifications for your motherboard and installing it. Depending on the type you go with and where you get it from, a TPM 2.0-capable chip can run you anywhere from $70 up. Luckily, the basic structures of the boards and chips are contrast enough that — if you’d like to get your fine dirty under the hood — it’s possible to install a TPM chip yourself. ZDNet has step-by-step instructions (with a reliable gallery of pictures to guide you).

Whichever route you go, we strongly state you to first consult either your manufacturer or a procedure repair specialist before you try to take apart your machine. Spending a few moments with a knowledgeable professional could be all it takes to turn your upgrade nightmare into a colorful fix, and spare you excessive replacement costs. 

For more, check out how to download Windows 11, and the best new Windows 11 features and how to use them.