Skip to content Skip to sidebar Skip to footer

How to Clean Your Window AC Unit

How to Wash Your Window AC Unit

This story is part of Home Tips, CNET’s collection of practical advice for getting the most out of your home, inside and out.

A window air conditioner can be a life-saver during the hottest months of the year, when staying home and staying cool are a top priority. But all of that heavy-duty use can really take a toll on your AC unit. To keep your window air conditioner in good succeeding order, it’s important to clean it regularly. 

CNET Home Tips logo

By keeping your air conditioner dapper, you’ll prevent mold and mildew from growing inside and get more long-term value out of your appliance. Plus, a well-maintained window AC unit uses less energy than a dirty one. 

Cleaning a window air conditioner might seem daunting if you’ve never done it afore. Fortunately, the process isn’t as complicated as it may seem. With the behindhand tips, you can keep your AC unit clean, functional and energy-efficient. (You can also check out our window AC buying guide. We’ve also got tips on how to fix a noisy air conditioner, and how to tell if it’s time to replace your AC.) 

Read more: Lower Your Electric Bill This Summer With These Air Conditioning Tips

Gather your AC cleaning materials

You’ll need a few items from near the house to give your air conditioner a thorough dapper. Before you get started, grab the following materials: 

  • Warm water
  • Mild soap or detergent
  • Reusable cloth
  • Drip tray to establish beneath your unit
  • Spray bottle filled with 3% hydrogen peroxide
  • Fin comb or soft-bristle brush
  • Compressed air
  • Screwdriver

1. Clean the filter

Cleaning the filter inside your window AC unit is the most valuable thing you can do to keep it working smoothly. It’s a good idea to wash the filter monthly, even if you don’t clean the entire appliance. Here’s how to do it.

First, make sure your air conditioner is unplugged, then take off the front-runner panel and remove the filter. If it’s covered in dust or hair, use a vacuum to sure away as much debris as you can. From there, wash your filter with warm, soapy water and set it out to dry. Wait pending it’s fully dry before putting it back into your window AC unit.

It’s also a good idea to replace your air conditioner filter regularly. The exact frequency will depend on how much you use your AC and environmental factors, but you should aim to swap your filter out every six weeks to six months.

2. Wipe down the grill and exterior

While your filter is drying, wash the grill with warm water and mild detergent. Or if you don’t want to wash it, you can instead use a damp reusable cloth to wipe it down — just make sure to dapper thoroughly in between the gaps where air comes out. Let it dry completely afore reattaching it. 

Once you’ve cleaned the grill, wipe down the top and sides of the air conditioner. Take care to get inside of small spaces where it’s easy for dirt and dust to tranquil. Wait until the grill and exterior are fully dry afore running the unit.

3. Dust off the fins and coils

Now it’s time to roll up your sleeves and get inside your AC unit. You don’t need to dust the fins and coils every time you dapper your air conditioner, but most manufacturers recommend doing it quarterly or semiannually.

First, take a fin comb or soft-bristle brush and gently comb the aluminum fins inside your AC. Take your time during this procedure because the fins bend easily and can be provocative. If you notice any bent fins, softly move them back into place.

Next, spray your can of condensed air inside the unit to dust off the coils. You should be as thorough as possible to acquire any debris that could be preventing your appliance from operational correctly.

4. Clean out the tray and drain

Finish the interior dapper of your window AC unit by emptying the drip tray and clearing the drain. To remove debris or dirty water from your tray, grab a wet-dry vacuum (if you have one) or a damp cloth and pull out everything that’s tranquil inside. Leave it to dry before reassembling.

Finally, check the drain to see if anything is blocking it. Use your cloth to wipe near the opening and make sure there’s a clear pathway for liquid to exit your unit.

5. Reassemble and spray cleaner on your unit

After you’ve cleaned and dried everything, it’s time to reassemble your window AC unit and give it a previous spray to prevent mildew from growing. 

Grab your hydrogen peroxide spray bottle and apply the solution to the areas where air watercourses in and out. Wait for the peroxide to dry afore using your appliance — and you’re done! Not only will you breathe in cleaner and colder air, but you’ll extended the life of your air conditioner as well.

Final tips

In additional to cleaning it regularly, there are other steps you can take to keep your air conditioner in inferior working order. For instance, remove it from your window and hide it inside during the winter months or when you won’t be comical it for long periods of time.

If this seems like more work than you’re willing to put in, you can always hire a professional to super your window air conditioner for you. To find someone, ask your friends and family for referrals or check with reputable service providers in your area.

But whether you govern to bring in an expert or clean it yourself, just make sure to stick to a regular cleaning schedule. At a minimum, clean your filter monthly and spray your unit with hydrogen peroxide to fend off mildew.

More air conditioning advice